One of our experienced surveyors can inspect your property & provide you with a no-obligation quote. Your property will be drilled at certain points to provide access to the entire cavity for the insulation to be injected in. Certainfil Cavity Insulation Limited is a second generation family business specialising in installation of Bonded Bead Cavity Wall and Fibreglass quilting loft insulation.
As KIWA certified installers our cavity wall installations come with a 25 year Qualitymark Protection guarantee and our loft installations are completed to Building Control requirements. You can save up to 40% on your fuel bills and it benefits the environment as well as your pocket.
As KIWA certified installers our cavity wall installations come with a 25 year Qualitymark Protection guarantee and our loft installations are completed to Building Control requirements. You can save up to 40% on your fuel bills and it benefits the environment as well as your pocket.
Services
Cavity WallInsulation
Report
Certainfil Cavity Insulation Limited uses a high grade silver graphite expanded polystyrene bonded bead (EPS) system of installation. Silver graphite bead is typically 20% more effective at reducing heat loss than the older "white" bead that may also be offered by other installers.
Beads arrive at your home already manufactured to the density required by the Agrement Board and they are simply blown into the wall from the truck and sprayed with an adhesive so that they form a bonded mass.Because installation of cavity wall insulation is done externally there is no need for anyone to be at home during the installation which is usually completed in one day.
Beads arrive at your home already manufactured to the density required by the Agrement Board and they are simply blown into the wall from the truck and sprayed with an adhesive so that they form a bonded mass.Because installation of cavity wall insulation is done externally there is no need for anyone to be at home during the installation which is usually completed in one day.
LoftInsulation
Report
Current building control regulations require approximately 300 mm (12 inches) of insulation to be installed to roofspace areas. Most properties will have some insulation installed to their roofspace (often 100 mm) and therefore homeowners often think they are adequately insulated.
The regulations were amended as part of the overall plan to meet the EU CO2 emissions targets for Northern Ireland and the UK by addressing the poor thermal efficiency of homes, to reduce heat loss and therefore improve energy efficiency and reduce waste.The additional benefit to the homeowner is reduced fuel bills and a warmer home.
The regulations were amended as part of the overall plan to meet the EU CO2 emissions targets for Northern Ireland and the UK by addressing the poor thermal efficiency of homes, to reduce heat loss and therefore improve energy efficiency and reduce waste.The additional benefit to the homeowner is reduced fuel bills and a warmer home.
Partial Fill CavityWall Insualtion
Report
After 1934 houses where built with empty cavity walls, these cavities range traditionally from 50mm to 75mm wide. The vast majority of this house type have had insulation installed in the cavity over the last 40 years. Some builders started to built in a solid board around 1985 onwards This board was approx 30mm and fitted against the inner leaf of the cavity, at this time cavities increased from 75mm to 100mm.
InsulationExtraction
Report
Using specialist tools and machinery, Certainfil Insulation can remove defective cavity wall insulation, causing little disturbance to the building or the inhabitants of the home. Certainfil Insulation can undetake the extraction of Rockwool, White wool, foam and bead insulation products from the cavity walls of domestic houses or apartments.
Reviews
Be the first to review Certainfil Cavity Insulation.
Write a Review
